States Covered
Roof Type
Turnaround
Any Scale
Half the change orders, truck rolls and AHJ corrections in solar trace back to one thing, a site that wasn’t captured right the first time. A panel that’s actually 100A, a rafter spacing nobody measured, a gas main too close to the meter. Get the survey wrong and everything downstream inherits it.
A missed bus rating or breaker amperage turns into a redesign after the crew is already on site.
Send someone back for the one measurement that got skipped, and the job’s profit goes with them.
Your designer can only draw what the survey gives them. Garbage in, redline out.
Shingle, tile, metal, ground, each needs specific checks most surveys skip.
Vishtik surveyors document every angle, measurement and panel detail your design and permit set will need, so nothing comes back to bite you on install day.
A Vishtik survey isn’t a few phone photos. It’s a structured capture of every element your plan set, structural review and electrical design depend on.
Street view, a close-up of the address number, and the exterior from every angle.
Age, tilt, overhang and all-angle photos, with the tilt measurement documented.
Access point mapped, plus rafter height, depth and spacing measurements.
Main and sub locations, manufacturer and max bus rating, main-breaker amperage, and photos of the panel wall, open panel and breakers.
Meter location, utility company, a map note and photos from every angle.
Height and width, distance to the main service panel, and the location mapped.
Placement suggestions, wall-dimension markups and appliance info, chargers, water heaters and the like.
System specs, AC disconnect details and photos of modules and inverters when a system is already in place.
Every photo, measurement and map note your team needs, structured and ready for design.
A shingle roof and a standing-seam metal roof don’t need the same checks. Our surveyors capture the details specific to each.
Number of shingle layers and a pliability test, plus the standard roof capture.
Front and back of a tile, weight measurement, and photos of any broken tiles.
Standing-seam height, width and spacing, for accurate attachment design.
Terrain, layout area and obstructions for ground-mount and flat-roof systems.
Orbital imagery at 50–75 ft AGL and a 35° tilt, a close-up of each roof face, and a top-down image for markup alongside on-roof measurements.
Pick the depth the project needs a lean retrofit capture, or a full survey that leaves the designer wanting for nothing.
Topography, structural integrity and electrical infrastructure, organized for design and installation.
Shading obstacles identified so panel placement and production are based on reality, not guesswork.
Every item checked against the survey standard before the package reaches your team.
The survey is the foundation. Get it right and everything after it design, permitting, install and runs cleaner.
Every detail your design and permit set need, documented on the first visit.
On-site capture anywhere in the United States.
Orbital imagery and hands-on measurements, not one or the other.
Shingle, tile, metal and ground, each captured the right way.
Photos, measurements and map notes in one structured package.
The survey flows into your plan set with nothing measured getting lost.
Send the project, get back a structured capture on schedule.
Give us the address and project type, and any specifics you want captured.
We schedule a surveyor on-site, or guide a remote capture where that fits.
Exterior, roof, attic, panels, utility and drone, every item to standard.
Every photo and measurement checked against the survey standard before it ships.
An organized survey package, ready to flow straight into design.
Exterior and address, roof inspection, attic and structural, service panels, utility meter and gas main, plus drone imagery and battery or existing-system detail when they apply.
Yes, residential, commercial, EV charging and utility-scale, at the same level of detail.
Yes. Orbital imagery at 50–75 ft AGL and a 35° tilt, close-ups of each roof face, and a top-down image for markup, alongside on-roof measurements.
Shingle, tile, metal and ground or flat each with the specific checks that roof needs.
Fast, on a schedule confirmed up front, so your design and permitting stay on track.
Yes — it’s structured to flow straight into your plan set, so nothing measured gets lost between survey and design.
The proposal is the start. Vishtik runs the engineering and approvals that turn a signed deal into an energized system.
PV, ESS and PV + ESS plan sets for homes.
Rooftop, carport, ground-mount and storage.
Permit and electrical design for EV charging.
Structural and electrical stamps in all 50 states.
Jurisdiction-specific packages, filed and tracked to approval.
Utility applications tracked through to Permission to Operate.
